Zenos Powerful TV Universal Remote Codes & Program Instructions

Are you using the Zenos Powerful TV and are you also looking for universal remote control codes to program with your TV, the codes below can be programmed your remote with your TV, once try them now. If you find the perfect code, try the methods below such as code search, manual method, and automatic search methods, whichever suits you, to help you get programmed with universal remotes of any brand like ge, directv, comcast, cox..etc

Zenos Powerful TV Universal 4-digit remote control

  • 3851
  • 1756

Zenos Powerful TV Universal 3-digit remote control

  • 535
  • 387

Zenos Powerful TV 5-digit universal remote control

  • 12049
  • 12434

How to program the Zenos Powerful TV universal remote control?

Depending on the remote you have, the code search method will be different, here is an example that may work with the most common remotes.

The method below is useful for finding the codes for your remote, if you cannot program with the codes above, try this method.

How to program the Zenos Powerful TV universal remote control with automatic search

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program the powerful Zenos television Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Zenos Powerful TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Zenos Powerful TV and also your favorite remote control. These methods are used for setting up the Zenos Powerful TV remote control.

Rate this post

Leave a Comment