Vizio Blu-Ray Player Universal Remote Codes & Program Instructions

Have you tried the universal remote control codes of the Vizio Blu-ray player several times? you haven’t found them yet? don’t worry here is the total list of codes from three digits to five digits. You can enter the codes mentioned below into your universal remote control to program with your favourite Vizio Blu-ray player. In this blog, you can learn how to program the Vizio remote control to the Vizio Blu-ray player. So also check the methods and codes in this tutorial.

Vizio Blu-Ray Player Universal Remote
Vizio Blu-Ray Player Universal Remote

Useful links:

Vizio Blu-Ray Player Universal Remote Codes

5-digit universal remote control codes for Vizio Blu-Ray player

  • 22563
  • 21169
  • 12563
  • 21064
  • 00155

Vizio Blu-Ray Player 4 digits Universal remote control codes

  • 1064
  • 1226
  • 1403
  • 1399
  • 1398
  • 1397
  • 1396
  • 1389
  • 1129
  • 0405
  • 1500

Vizio Blu-Ray Player 3 digits Universal remote control codes

  • 411

If the above codes do not work, you can manually search for the working code with your remote. The methods mentioned below for manual code search. So check them out now.

Vizio Blu-Ray Player Universal Program Instructions

How to program the Vizio Blu-Ray universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Vizio Blu-Ray Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • Press the “TV” On your “Vizio Blu-Ray universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Keycode” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Vizio Blu-Ray universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Vizio Blu-Ray player and also for your favorite remote control. These methods are used for setting up the Vizio Blu-Ray Player remote control.

Conclusion:

If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.

Rate this post

Leave a Comment