If you control everything with one remote, then you need to apply these universal codes. For this you need to find the code that corresponds to the brand of your TV. After that, you now need to proceed with programming the selected code from the shared list below. You might be thinking about the programming process. Then let me tell you, you just need to enter the 4 digit code using the Terk Universal Remote Control Codes and the process is almost done.
Contents
Terk Universal Remote Control Code List
| Mark | Remote codes |
|---|---|
| AOC | 1004, 1005, 1006, 1007, 1175, 1082, 1176, 1195, 1196, 1237 |
| Admiral | 1001, 1173, 1083, 1211 |
| Adventure | 1174 |
| Aiko | 1016 |
| Akai | 1002 |
| Mountain peak | 1236, 1240, 1241 |
| Audiovox | 1038 |
| Broksonic | 1250, 1280 |
| Citizen | 1004, 1006, 1008, 1171, 1038, 1016, 1105, 1196, 1132 |
| Craig | 1038 |
| Curtis Mathematics | 1000, 1004, 1006, 1015, 1049, 1105, 1073, 1171, 1196, 1212 |
| Daewoo | 1004, 1005, 1006, 1018, 1017, 1082, 1171, 1202, 1196 |
| Daytron | 1004, 1006, 1171, 1196 |
| Emerson | 1004, 1006, 1012, 1025, 1023, 1029, 1030, 1035, 1033, 1037, 1036, |
| To consider | 1004, 1006, 1196 |
| Fujitsu | 1046, 1047 |
| funai | 1038, 1046, 1047 |
| TO GIVE | 1000, 1003, 1004, 1006, 1022, 1052, 1054, 1087, 1100, 1165, 1166 |
| Star of gold | 1004, 1005, 1006, 1012, 1056, 1019, 1082, 1155, 1156, 1172, 1196 |
| Hisense | 1237 |
| Hitachi | 1004, 1006, 1012, 1013, 1135, 1136, 1145, 1063, 1179, 1185 |
| Infinite | 1062, 1130 |
| JVC | 1012, 1013, 1014, 1054, 1060, 1063, 1066, 1123, 1157, 1159 |
| Jensen | 1004, 1006, 1196 |
| LG | 1005, 1082 |
| Magnavox | 1004, 1006, 1008, 1019, 1062, 1069, 1075, 1077, 1088, 1130 |
| Mitsubishi | 1004, 1005, 1006, 1022, 1051, 1079, 1080, 1082, 1064 |
| Motorola | 1003, 1173 |
| Onwa | 1038 |
| Panasonic | 1003, 1054, 1130, 1062, 1160, 1350, 1351, 1214 |
| Philco | 1003, 1004, 1005, 1006, 1008, 1062, 1069, 1019, 1075, 1077, 1082, 1088 |
| Philips | 1003, 1004, 1008, 1019, 1012, 1062, 1068, 1069, 1075, 1088, 1087 |
| Pioneer | 1004, 1006, 1136, 1185, 1179, 1196 |
| Proscan | 1000, 1100, 1181, 1212, 1233 |
| Proton | 1004, 1006, 1012, 1196 |
| RCA | 1000, 1003, 1004, 1005, 1006, 1007, 1019, 1082, 1096, 1099, 1098 |
| Samsung | 1004, 1005, 1012, 1015, 1019, 1082, 1105, 1106, 1171, 1172, 1196 |
| Sansui | 1191, 1208, 1282 |
| Sanyo | 1004, 1048, 1073, 1080, 1108, 1169, 1180, 1196 |
| Scott | 1004, 1006, 1012, 1035, 1038, 1047, 1046, 1196 |
| Sharp | 1004, 1006, 1012, 1026, 1029, 1095, 1111, 1112, 1171, 1173, 1196 |
| Signature | 1001 |
| Sony | 1002, 1205, 1216, 1218 |
| Sylvanie | 1004, 1006, 1008, 1019, 1062, 1068, 1075, 1076, 1077, 1088, 1130 |
| Symphonic | 1033, 1038, 1189 |
| Technical | 1001, 1004, 1005, 1006, 1008, 1013, 1014, 1016, 1038, 1046, 1047, 1063 |
| Toshiba | 1049, 1071, 1072, 1073, 1105, 1109, 1117, 1118, 1160, 1283 |
| Yahama | 1004, 1005, 1006, 1019, 1082, 1196 |
| Zenith | 1004, 1083, 1151, 1152, 1154, 1196, 1210, 1217 |
How to program the Terk universal remote control with automatic search
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program Terk Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
Overview
Well, without wasting a single moment, just apply the universal codes on your electronic device and enjoy your favorite shows undisturbed. If the codes show an error, let us know.
Suresh Choudhary
