Home » Soundbar » Tao Tronics Soundbar Universal Remote Codes & Program Instructions

Tao Tronics Soundbar Universal Remote Codes & Program Instructions

Hi! are you using the Tao Tronics soundbar (tt-sk023, tt-sk017 and tt-sk15)? or any other model and do you want to use it with your favorite universal remotes like RCA universal remote or any other remote then why later in this blog we are mentioning some useful methods to easily program your TaoTronics sound bar models preferred such as tt -sk023, tt-sk017 and tt-sk15. In fact, these codes are not conventional remote codes, but if you program them correctly, they will definitely work.

TaoTronics Soundbar Universal Remote Control Code List

  • 0XD9
  • 0X14
  • 1999

In fact, these codes work on TaoTronics soundbar models 34 inch sound bar TT-SK15, 21 inch sound bar TT-SK017 and 36 inch sound bar TT-SK016.

How to connect the TaoTronics soundbar with a Bluetooth connection (wireless)

  • First turn on the sound bar, then “Switch to Bluetooth mode”
  • Make sure Bluetooth to activate on your device and also search for nearby Bluetooth connections.
  • For IOS devices: Settings> General> Bluetooth> ON
  • For Android: Settings> Bluetooth> ON> Search for devices
  • You must select “Tao Tronics sound bar” from the search results, then “Faucet” to log in
  • Then the Bluetooth indicator will be turned to the plain blue and there will also be a ” Beep “, this means that your device has been successfully connected.

Some remotes can be programmed with the devices using the methods mentioned below, if the above method does not work, also try the methods below.

How to program the Tao Tronics soundbar universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

How to program the Tao Tronics soundbar Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Tao Tronics Soundbar Universal Remote Control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Tao Tronics soundbar universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been used to program your Tao Tronics sound bar as well as your favorite remote control. These methods are used for the configuration of the Tao Tronics Soundbar remote control.


If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site. Or do you need other remote codes, please feel free to ask us through the comments section below and we will provide those codes to you.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment