Home » Uncategorized » Summit TVs – RV Universal Remote Codes & Program Instructions

Summit TVs – RV Universal Remote Codes & Program Instructions

Here are the codes for RV Summit television universal remote control and you can check all types of codes below, if you are unable to connect your favorite universal remote control with Summit tv-rv television, you need to check the code list below Below can use these codes in your remote to program with your TV.

Summit TV Universal Remote Codes

  • 506
  • 508

Summit Televisions – RV Televison Codes 4 Digit Universal Remote Control

  • 1758
  • 1043
  • 0030

Summit Televisions – RV Televison Codes 5 Digit Universal Remote Control

  • 10030

Summit Televisions – RV Televison Universal 3-Digit Remote Control

  • 508
  • 506

Summit TVs – Universal RV Remote Control Code List

You can operate the Summit tv with the CAB or SAT remote after entering the following codes according to the instructions given in the booklet. The codes have been mentioned below, check them now.

Mark Codes
AT&T 1043
Comcast 10030
DirecTV 10030
RCA 0030

We are now going to provide you with the best working methods to program your TV with your favorite universal remote. So check them out now.

How to program Summit televisions – RV Televison universal remote control?

There are three different methods to operate any universal remote by programming with your TV. If you program with functional codes using the methods below, your TV will work properly! So let’s see the methods if you have the codes from the code list above.

How to program the Summit TV RV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Summit TV Universal RV remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Summit TV RV universal remote with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been used to program your Summit televisions – RV Televison tv and also for your favorite remote control. These methods are used for remote setup of Summit – RV Televison televisions.


If you found that any of the above codes didn’t work for your device, try entering the alternative codes mentioned above and you are still having the same issue, then leave a comment below about your problem and we will try to solve it and also provide a better solution for you.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment