Having trouble finding the correct Spectrum DVD universal remote control codes? There is nothing to worry about as this article contains all the codes and instructions for programming the Spectrum DVD remote control with your favorite devices. You need to decide which audio or video device you want to use with the Spectrum DVD remote control. We are putting together almost the entire list of DVD remote control codes for Spectrum. By entering the perfect Spectrum DVD Universal Remote Control Code, you are on your way to successfully programming your device.
Contents
- 1 Spectrum DVD Universal Remote Code List
- 2 How to program the Spectrum DVD universal remote control
- 3 How to program Spectrum DVD universal remote control without codes
- 4 How to program a Spectrum DVD Universal remote control with manual method
- 5 How to program the Spectrum DVD universal remote with Code search
Spectrum DVD Universal Remote Code List
On any device, you will find in our list the exact code to program with the Spectrum DVD universal remote control. Along with that, also check out the full list of Spectrum 4-Digit Universal DVD Remote Control Codes you may need.
Find the exact code for the type of device you want to work with with the Spectrum DVD universal remote:
Spectrum DVD Universal Remote Codes
Mark | DVD Codes |
---|---|
LG | 350, 057, 074, 091 |
Magnavox | 066, 096 |
Panasonic | 144, 150, 285, 138, 042 |
Philips | 066, 276, 317, 344 |
RCA | 027, 307 |
Samsung | 070, 380, 275, 165, 159, 137 |
Sony | 033, 241, 378, 242, 191, 001, 363, 286, 243, 340, 368, 343, 351, 145 |
Toshiba: | 035, 356, 164, 141, 273, 130, 188 |
Spectrum DVD / Blu-Ray Universal Remote Codes
Mark | DVD / Blu-Ray Codes |
---|---|
Denon | 329 |
Panasonic | 346, 285 |
Philips | 344 |
Pioneer | 304 |
Samsung | 275 |
Sony | 340, 286 |
Toshiba | 273 |
How to program the Spectrum DVD universal remote control
There are some steps you need to follow if you want to control multiple devices using the Spectrum DVD universal remote. As mentioned above, DVD remote control codes for Spectrum play a crucial role when programming.
Carefully follow the steps below to successfully program the Spectrum DVD universal remote:
How to program Spectrum DVD universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program a Spectrum DVD Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
Conclusion
If you’re having trouble using any of the codes above, we’ll update the list whenever there are new ones available. Or please send us a message if you have found the correct code for the preferred device you want to program with the Spectrum universal remote. Please feel free to leave your comment below.