Home » Uncategorized » Soniq Universal Remote Codes & Program Instructions

Soniq Universal Remote Codes & Program Instructions

For your soniq TV, we have universal remote control codes for all types of universal remote controls. If you want to use soniq tv pairing code, you need to try the codes below, then you will use your soniq tv universal remote.

This is the best platform to get the remote control codes for your favorite universal remote and the codes have been mentioned below, you have to try them one by one until your remote is paired with your favorite universal remote. . So why late, dive into the code list now and try these 2 codes first 1497, 1328, if these codes don’t work, try below.

Soniq Universal Remote Codes 2022

4-digit codes for the Soniq universal remote control

  • 1473
  • 0178
  • 0180
  • 0003
  • 0092
  • 0045
  • 0019
  • 0030
  • 0056
  • 0032
  • 0047
  • 0054
  • 0060
  • 0039

3-digit code for the Soniq universal remote control

  • 014

5-digit code for the Soniq universal remote control

  • 19253

Audiosonic universal remote control code for Soniq TV

  • 0301

Skandia universal remote control codes for Soniq

  • 2551
  • 2791

How to program the Soniq universal remote control

In case you want to program Soniq remote control, here are different ways to do it.

How to program the Soniq universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-” switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Soniq Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Soniq universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Soniq universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all functions.

With the above three methods, we can easily program the universal remote control of our Soniq TV.


If you have found the above codes to work for your device, please share this article with as many people as possible, there are so many users looking forward to these codes, so share them and program your TV remote with your favourite universal remote.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment