Skyworth Universal Remote Codes & Program Instructions

Do you know how to connect your skyworth remote control to your TV using skyworth universal remote control codes! If not then follow our tutorial which will give you the best advice with proper steps using universal 3-4-5 digit remote control codes, so why late join us.

skyworth tv remote codes then we will provide you the methods to program your TV with your favorite universal remote control and the codes below can work for huayu, cybertec, chunglap, so, rm-014s +, new star brands and many more.

Skyworth Universal Remote Control 4-digit codes

  • 0696
  • 0698
  • 0264
  • 0727
  • 0009
  • 0037
  • 0748
  • 0556
  • 0753
  • 0817

Skyworth Universal Remote Control 5-digit codes

  • 00556
  • 00817
  • 00264
  • 00009
  • 00753
  • 00037

Skyworth Universal Remote 3-Digit Codes

  • 531
  • 753
  • 817

Chunghop Universal Remote Control Codes for Skyworth

036, 044, 057, 073

How to program Skyworth universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

How to program Skyworth Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Skyworth Universal Remote”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Skyworth universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been used to program your Skyworth TV and also your favorite remote control. These methods are used for the configuration of the Skyworth remote control.

Conclusion:

If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.

Rate this post

Leave a Comment