From the lines below we have mentioned all the useful universal remote control codes which are eligible for different brand remotes like GE, Directv etc. If you want to operate your TV, you must use the codes below by following the methods that will appear after the codes.
- 0.1 4-digit Senzu TV universal remote control
- 0.2 Senzu TV universal remote control 3-digit codes
- 0.3 Senzu TV 5-digit universal remote control
- 1 How to program the Senzu TV universal remote control?
- 2 How to program the Senzu TV universal remote control without codes
- 3 How to program Senzu TV Universal remote control with manual method
- 4 How to program the Senzu TV universal remote control with Code search
4-digit Senzu TV universal remote control
Senzu TV universal remote control 3-digit codes
Senzu TV 5-digit universal remote control
Even after trying these codes, if you can’t pair, you need to contact senzu customer service, we give you senzu customer service email id and phone number so you can contact them.
Email ID: [email protected]
Telephone number: 1300 765 663
How to program the Senzu TV universal remote control?
There are three different methods to operate any universal remote by programming with your TV. If you program with functional codes using the methods below, your TV will work properly! So let’s see the methods if you have the codes from the code list above.
How to program the Senzu TV universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program Senzu TV Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Senzu TV universal remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Senzu TV universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been worked out to program your Without television and also for your favorite remote control. These methods are used to Without television remote control setup.
If you found that any of the above codes didn’t work for your device, try entering the alternative codes mentioned above and you are still having the same issue, then leave a comment below about your problem and we will try to solve it and also provide a better solution for you.