Home » Blu-Ray » Samsung DVD Universal Remote Codes

Samsung DVD Universal Remote Codes

Do you need universal remote control codes for your Samsung DVD player? then here you can get so many codes which also work for SAT and CABLE remotes. You just get the universal samsung dvd remote control code from the list mentioned below and follow the programming method to program and to universal samsung tv remote control codes check out this article.

samsung soundbar remote control codes
  • samsung tv remote control program for blu ray player
  • Samsung 4-digit DVD remote control

    • 0820
    • 0490
    • 1075
    • 1936
    • 0573
    • 1928
    • 0744
    • 1932

    Samsung DVD Remote Control 5 Digit Codes

    • 10814
    • 10037
    • 10329
    • 10587
    • 10482
    • 10427
    • 10250
    • 11581
    • 10812
    • 10060
    • 11632
    • 10702
    • 11959
    • 11060
    • 10030
    • 10056
    • 10110
    • 10217
    • 10032
    • 10178
    • 10019

    How to program Samsung DVD universal remote control without codes

    In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

    1. “Light up” smart device like “TV” that you want the universal remote to work.
    2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
    3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
    4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
    5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

    How to program Samsung DVD Universal remote control with manual method

    Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

    How to program Samsung DVD universal remote control with Code search

    If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

    • First of all “Turn on the device”
    • Now press and hold the “To install” button
    • Enter the “9-9-1” code (three digits)
    • Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”

    The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

    Photo of author

    Suresh Choudhary

    Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

    Leave a Comment