Home » Uncategorized » Pioneer DVD Player Universal Remote Codes

Pioneer DVD Player Universal Remote Codes

Are you a pioneer DVD player user? do you want to program it with your favorite universal remote then this is the perfect item to connect your dvd player with the remote. So let’s see the procedure with the codes. If you have any problem even after following the below mentioned procedure, please let us know, we will tell you the solution. We have already listed all universal remote control codes for Pioneer DVD player so why late just check the article below now.

Pioneer DVD player universal remote control code list

  • 0571
  • 0631
  • 1965
  • 2008
  • 2021
  • 2160
  • 2164
  • 2191
  • 2223
  • 2224
  • 2310
  • 2337
  • 2400
  • 0632
  • 0525
  • 0638
  • 1900
  • 1902

How to program the Pioneer DVD universal remote with automatic search

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program a Pioneer DVD Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Pioneer DVD universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion:

In this blog post, we have mentioned each Universal remote control codes for Pioneer DVD Player, but if you have problems with the above universal remote control codes or we failed to mention some codes, please leave a comment, we will rectify the faults, and we will also mention those Pioneer DVD Player remote control codes.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment