Home » Uncategorized » Olevia TV Universal Remote Codes & Program Instructions

Olevia TV Universal Remote Codes & Program Instructions

Are you using Olevia tv and looking for olevia 3 digit remote codes then this is the perfect blog that can provide you with all universal remote control codes just like it is a three digit code , from a 4-digit code or 5-digit codes, in this blog post we give tips for remote programming olevia tv with working codes.

Olevia TV Universal Remote Codes

4-digit Olevia TV universal remote control

  • 1144
  • 1178
  • 1610
  • 1144
  • 1240
  • 1331
  • 1610

Olevia TV universal remote control 3 digits Code

506, 127, 432

Olevia TV universal remote control 5 digits Code

  • 11144
  • 11240
  • 12272
  • 11331
  • 11858
  • 11610

GE universal remote control codes for Olevia TV

  • 1027

Olevia TV Remote Control Codes Comcast

11144, 11240, 11331, 12272, 11610

Universal RCA Remote Control Codes for Olevia TV

077, 1222, 1207, 1610, 1144, 1240, 1331, 11610, 11144, 11240, 11331

Olevia TV Program Instructions

How to program the Olevia TV universal remote control?

Depending on the remote you have, the code search method will be different, here is an example that may work with the most common remotes.

  • “Light up” your TV and ” Press and hold ” the tv button then “Enter the codes” that suit your brand
  • Your “The television will be off” when you enter the correct code, it means your setup is complete.

Note: If your TV does not turn off, repeat the procedure with other codes. If not, you can also check the alternative methods.

How to program the Olevia TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

smart device like “TV” that you want the universal remote to work.

  • “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  • Point the remote control at the device and click “CH +” & “CH-” switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  • Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  • Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Olevia TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Olevia TV universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Olevia TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Olevia TV and also for your favorite remote control. These methods are used for the configuration of the Olevia remote control.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment