One of the most trusted brands of universal DVD remote control today is the Magnavox. This could be easily programmed with multiple devices using specific Magnavox DVD universal remote control codes. Once the correct codes for the Magnavox DVD player and other devices are entered correctly, the programming process is successful. In that case, you will totally appreciate the convenience of controlling multiple devices with a single DVD Magnavox remote control. Read the article below to guide you with the codes and instructions you need to program the Magnavox DVD remote control.
- 1 Magnavox DVD universal remote control code list
- 2 How to program the Magnavox DVD universal remote control
- 3 How to program the Magnavox DVD universal remote control without codes
- 4 How to program a Magnavox DVD Universal remote control with manual method
- 5 How to program the Magnavox DVD universal remote control with Code search
|Digital apex||0405, 0437, 0442|
|Beautiful singing design||0456|
|California Audio Labs||0406|
|Craig||0438, 0412, 0413, 0414, 0415|
|Denon||0406, 0466, 0517|
|TO GIVE||0400, 0528|
|Go to the video||0529, 0429, 0430, 0440|
|Star of gold||0430, 0440|
|Harman / Kardon||0447|
|Badge||0427, 0462, 0471, 0477, 0499, 0507|
|To integrate||0411, 0532, 0463|
|JVC||0527, 0439, 0445, 0457, 0469, 0509|
|LG||0430, 0440, 0457, 0515, 0504|
|Magnavox||0407, 0522, 0525, 0427, 0452, 0454, 0513|
|Memorex||0428, 0438, 0449, 0464, 0508|
|Onkyo||0407, 0532, 0463, 0506|
|Panasonic||0406, 0407, 0458, 0459, 0510|
|Philips||0407, 0522, 0523, 0524, 0525, 0427, 0448, 0452, 0454, 0472, 0512|
|Pioneer||0411, 0423, 0426, 0456, 0473, 0519|
|RCA||0400, 0411, 0436, 0464|
|Samsung||0406, 0408, 0424, 0435, 0461, 0470, 0475, 0503, 0505|
|Sharp||0530, 0427, 0431, 0465, 0502|
|Sony||0401, 0402, 0403, 0404, 0432, 0443, 0453, 0455, 0501|
|Toshiba||0407, 0428, 0460, 0467, 0478, 0500|
|Yamaha||0406, 0522, 0525, 0425, 0434, 0521|
|Zenith||0407, 0430, 0440|
You will never run out of Magnavox DVD codes because we have the complete list of almost all home entertainment devices. Remember that Magnavox DVD remote control codes correspond to specific device types. You need to look carefully while looking for the perfect Magnavox universal remote control codes for DVD player and other devices. Find out the perfect code that matches your device from the list below:
You make the best decision when programming your Magnavox DVD remote control to control multiple devices. This will not only provide you with maximum convenience, but a great way to upgrade your home entertainment system.
Follow the instructions below to successfully program the Magnavox DVD universal remote control:
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Universal DVD Magnavox remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
How did you find this post? Did this help you to program your DVD Magnavox remote? Please tell us more about which code you used and which is which device. We love to hear your experience with us. For comments or suggestions, do not hesitate to leave a message on the box provided below.