Home » Uncategorized » Logitech Harmony 650 Universal Remote Program Instructions & Codes

Logitech Harmony 650 Universal Remote Program Instructions & Codes

If you want more advice on this Logitech Harmony 650 universal remote, check below.

How to set up the Logitech Harmony 650 remote

There are simple steps to setting up your Harmony remote, and then you can use it as easily as possible. The remote will be in your control after the steps below.

  1. chose “Add a device”
  2. Then select “Satellite” which is under “Devices”
  3. After that chose “beyond platinum” which is under “maker”
  4. Finally you have to type the words “Explore MODE1” Where “Explore MODE2” under the “Model”
  5. You can test the remote now and it is working now.

More Methods to Program the Logitech Harmony 650

How to program the Logitech Harmony 650 universal remote with automatic search

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Logitech Harmony 650 Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Logitech Harmony 650 Universal Remote”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Logitech Harmony 650 universal remote with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion:

If you need any help from us regarding any kind of universal remote control codes, please contact us and we will give you a better suggestion and solve your problem ASAP. Keep visiting to get more update universal remote control codes.

Leave a Comment