Home » TV » Logik TV Universal Remote Codes & Program Instructions

Logik TV Universal Remote Codes & Program Instructions

Have you brought a new universal remote for your Logik TV and don’t know the remote control codes, here is the best guide to program your TV with the universal remote using some codes like three digit codes, four digit codes and also five digit codes too.

List of 4-digit codes for the Logik TV universal remote control

  • 1107
  • 0399
  • 0039
  • 0011
  • 0908
  • 2107
  • 0060
  • 1245
  • 0726
  • 1065
  • 2135
  • 0016

List of 3-digit codes for the Logik TV universal remote control

  • 016
  • 072

List of 5-digit codes for the Logik TV universal remote control

10016, 14235, 16915, 14216, 16611, 12246, 12293

Universal RCA remote control codes for Logik TV

1001, 1083

GE and One-For-All universal remote control codes for Logik TV

0031, 0000, 0001

Philips universal remote control codes for Logik TV

0704, 0601, 0701

The remote control codes will work on the Logik TV model numbers:

LCXW32HD1 / LCXW37HD1, L40DIGB20, L40LCD11, LOG37LW427, LCXW30NN6, LOG32LW782, L323CD11, L323ED11, L423CD11 / L473CD11, LCX17LN2, LCXW23NT4, LOG19WHD17, L22FED12 / L24FED12, L19HED12, L19HED12l, L22FE12 / L24FE12, L19HE12, L22FEDN12 / L22FEDP12 / L22FEDR12 / L22FEDW12, L22FEDV12 /, L22FEDY12 / L22FEDO12, L26HED12, L26FE12, L26FE12l, L32HE12, L32HED12, L39FE12, L46FE12, LCXW19LN2D, L24FEDN13 / P13 / R13 / W13, L32HE13, L22FED1, L1919DV19LCB20, L22FED1,1919DV19 / LD10N19, L19LDVP11 / L19LDVN11, L15LID628E / L19LI628E / L19LID628E / L19LID628WE / L22LI628E / L22LID628E / L22LID628WE, L19LIDI8 / L19LIDI8W / L22LIDI8 / L22LIDI8W, L19DVDP19 / L19DVDW19 / L22DVDB19 / L22DVDP19 / L22DVDW19, L19LDIB11, L19DIGB10, L19LDVB19, L17LIDI9E / L17LIDI9WE / L19LIDI9E / L19LIDI9WE / L22LIDI9E / L22LIDI9W, L22LDVB11 / L22LDVW11 / L22LDVR11 / L22LDVS11 / L22LDVN11
L19LDIB10 / L22LDIB10, L22LDVB19, L22DVDB10, L24DIGB1, L24DVDB19, L26DIGB21, L26DVDB21, L32DLCD11, L22DIGB10, L22DIGB11, L22DVDB11, L22DV11, L22DVDB20, L22D11, L22DVDB20, L22D11, L22DVDB20, L22D11, L22DVDB20
L24DVDB11, L24DVDB21, L26DIGB10, L26DIGB11, L26DVDB10, L26DVDB11, L26DVDB20, LCX27WN2, L32LW783, L32DIGB20

How to program the Logik TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

smart device like “TV” that you want the universal remote to work.

  • “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  • Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  • Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  • Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Logik TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Logik TV universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Logik TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Logik TV and also for your favorite remote control. These methods are used for configuring the Logik remote control.


If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site. Or do you need other remote codes, please feel free to ask us through the comments section below and we will provide those codes to you.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment