Home » Soundbar » Logik Soundbar Universal Remote Codes

Logik Soundbar Universal Remote Codes

Do you have any idea that your Logik Soundbar universal remote can be used to program other home entertainment devices? Yes, this type of universal remote is reliable enough to control other devices. With a simple process on how to program the Logik remote for the soundbar, you will experience a different upgrade in your home entertainment system. Find the list of Logik remote codes here and start the installation process to enjoy the comfort inside the living room. All you need is a universal Logik soundbar remote control with the codes required to control multiple devices.

Logik Soundbar universal remote control code list

Here you will find the list of codes for the Logik soundbar remote control. You will need these codes to program the preferred device. Logik soundbar remote codes are case sensitive, so you should be careful to enter the exact code provided here. In the list of codes, you must match the type of device you want to program. Here is the complete list of Logik Soundbar universal remote control codes:

  • 0596
  • 0016
  • 2135
  • 0060
  • 2107
  • 1107
  • 0011
  • 1065
  • 0908
  • 1245
  • 0726
  • 0399
  • 0039

Logik Soundbar Universal 3-digit remote control

  • 016
  • 072

To verify: logik DVD remote control codes

How to program Logik Soundbar universal remote control codes

Taking control of your home entertainment system has never been more convenient than programming a single remote. All you have to do is configure the device using a specific Logik soundbar remote control code. The process has a few easy-to-follow and easy-to-understand steps. There are times when the code you enter does not match the device you want to program. Simply repeat the process trying to enter another code until you are successful. To guide you on how to program the Logik soundbar universal remote control, here are the instructions:

How to program the Logik Soundbar universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

How to program the Logik soundbar Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Logik Soundbar universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Logik Soundbar universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion

Did you match the code with your device and set up the process successfully? Share your feedback with us by sharing the code you used that matches which device. Other readers may find your experience of great help to them. Please feel free to send us a message or leave a comment below.

Leave a Comment