Home » Blu-Ray » LG Soundbar Universal Remote Codes & Program Instructions

LG Soundbar Universal Remote Codes & Program Instructions

Would you like to control your LG sound bar with universal remote, wired remote or with SAT remote, don’t worry, you just need to have the below mentioned working codes.

LG Universal Remote Codes then it is easy to control your LG sound bar with the remote control.

Check out the codes we have mentioned below. Simply program the LG soundbar and your favorite remote using the 4 and 5 digit remote control codes mentioned below.

Useful links:

LG Soundbar 4-Digit Universal Remote Control Codes:

  • 1293
  • 4041
  • 4025

LG Soundbar 5-Digit Universal Remote Control Codes:

  • 32676
  • 31953
  • 31293
  • 11993

GE universal remote control codes for LG sound bar

  • 0972

Cox remote codes for LG sound bar

  • 3217

How to program the LG soundbar universal remote control?

THE USE OF DIRECTV AND REMOTE CODES DOESN’T WORK? Simply perform a code search using the volume – with the soundbar on – turn up the volume – but be muted –

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

Continue to press and release the Channel up button while pointing your remote at the soundbar. Once you see that the volume has changed, you need to click Select to lock the code.

(If the DirecTV remote does not turn the soundbar on or off, use the middle PWR button on the AV1 or AV2 device as this will control a soundbar.)

Now we will mention other methods to solve some problems. So check them once.

How to program LG soundbar universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program the LG sound bar Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Universal remote control for LG sound bar”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been used to program your LG sound bar as well as your favorite remote control. These methods are used for setting up the LG Soundbar remote control.

Conclusion:

Would you like more help from our support team, please leave your query in the comments section below and we will resolve it as soon as possible.

Leave your universal remote model and your LG soundbar model number, whatever problem you are having, we will fix it.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment