Keyin rm-133e universal remote control codes are roughly similar for every device, be it a samsung, sanyo, hitachi, astron, JVC tv… etc. codes for your different devices regardless of the device you use.
Contents
- 0.1 Keyin rm-133e 3-digit universal remote control
- 0.2 Keyin rm-133e Universal Remote Control 4 Digits Codes
- 1 How to program the Keyin rm-133e universal remote control with automatic search
- 2 How to program Keyin rm-133e Universal remote control with manual method
- 3 How to program the Keyin rm-133e universal remote control with Code search
Keyin rm-133e 3-digit universal remote control
- 002
- 006
- 071
- 128
Keyin rm-133e Universal Remote Control 4 Digits Codes
0029, 0022, 0286, 0280, 0379, 0380, 0456, 0604, 0637, 0079, 0104, 0107, 0110, 0166
| Mark | Keyin rm-133e remote codes |
|---|---|
| Sharp | 003, 018, 016, 025, 135, 136, 137 |
| Samsung | 008, 011, 016, 021, 024, 025, 033, 037, 039, 040, 043, 050, 051, 091, 113, 123 |
| Panasonic | 020, 001, 002, 014, 015, 021, 022, 059, 066 |
| JVC | 089, 161 |
| Before | 003, 054, 055, 062, 070, 148, 149, 170, 171 |
| TCL | 051, 053, 068, 071, 073, 082, 083, 084, 085, 015, 028, 030, 089, 090, 091, 079, 159, 285, 286, 287 |
| LG | 024, 040, 098, 043, 140, 259, 260, 261 |
Universal Remote Codes Kevin RM-133e for Sharp
003, 018, 016, 025, 135, 136, 137
Universal Remote Codes Kevin RM-133e for Samsung
008, 011, 016, 021, 024, 025, 033, 037, 039, 040, 043, 050, 051, 091, 113, 123
Universal Remote Codes Kevin RM-133e for Panasonic
020, 001, 002, 014, 015, 021, 022, 059, 066
Universal remote control codes Kevin RM-133e for JVC
089, 161
Universal Remote Control Codes Kevin RM-133e for Front
003, 054, 055, 062, 070, 148, 149, 170, 171
Universal remote control codes Kevin RM-133e for TCL
051, 053, 068, 071, 073, 082, 083, 084, 085, 015, 028, 030, 089, 090, 091, 079, 159, 285, 286, 287
Keyin Universal Remote Codes for LG
024, 040, 098, 043, 140, 259, 260, 261
Also check: lg universal remote control code list
How to program the Keyin rm-133e universal remote control with automatic search
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Keyin rm-133e universal remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Keyin rm-133e universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope that the above methods and the codes have been worked to program your Keyin rm-133e and also for your favorite remote control. These methods are used for the configuration of the Keyin rm-133e remote control.
Conclusion:
If you feel good with this article then please give us a feedback, it will give us a boost to improve our site and reach many aspiring those who are waiting for their remote control codes, we are also accepting new ones universal remote control codes these will work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.