Home » Uncategorized » JVC TV’s Universal Remote Codes & Program Instructions

JVC TV’s Universal Remote Codes & Program Instructions

If you don’t have three-digit, four-digit or even five-digit JVC universal remote control codes, then you are powerless with your branded universal remote control, if you want to program your favorite universal remote control with your original JVC smart remote control. tv then you should have the codes and the codes have been mentioned below.

JVC TV Universal Remote Control 4-Digit Codes

1227, 1130, 1131, 1080, 1092, 1117, 1131, 1235, 1288, 1299, 1011, 1012, 1026, 1049, 1052, 1054, 1055

JVC TV Universal Remote Control 3 Digit Codes

065, 067, 089, 013, 054, 055, 060

JVC TV Universal Remote Control 5 Digit Codes

12049, 11670, 11349, 12463, 11245, 107311, 10169, 17706, 11892, 12859, 13829, 10053, 12561, 10683, 14808, 12265, 10463, 19405, 14273, 18016, 12811, 13650, 10650, 10053, 10069, 10160, 1193, 11774

Universal RCA Remote Control Codes for JVC TV

1159, 1063, 1054, 1285, 1269, 1157, 1055, 1065, 1239, 1013, 1123, 1430, 1066,1067, 1393, 1158, 1060, 1012, 1396, 1182

GE Universal Remote Codes for JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

One for all remote codes JVC TV

0247, 0197, 0067, 0923, 0012, 0065, 0026, 0060, 0141, 0069

Philips universal remote control codes for JVC TV

0715, 0108, 0802, 0204, 0508, 0607, 0308, 0993, 0326, 0321

Magnavox Universal Remote Codes for JVC TV

  • 0038
  • 0053

How to program a universal remote control on a JVC TV?

There are three easy methods to simply program your favorite universal remote with your JVC TV remote control, so why late just check the steps below.

How to program JVC TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

How to program JVC TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “JVC TV universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the JVC TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

You can use another method which may be useful for programming your JVC 55EM76 TV With universal remote control codes, the steps are below.

Alternative method to set up JVC TV remote control

  • “Switch on” your television either “Manually or by the television remote control”
  • Select “Mute button” and “Select” simultaneously until the “green light will blink” twice
  • Use the “number key” to enter the “first digit” and you have to wait for the “green light” to flash twice on the top of the remote control
  • After that enter “Four digits left” now
  • Place the remote in front of your TV and press the “OFF” button, your TV should now be “off”
  • If your TV does not “turn off”, you need to repeat the process until your TV works with this universal remote.

There are different brands to operate this TV and we give all the remote control codes, so just check the codes one by one and your remote control code will be permanently programmed.

Leave a Comment