Home » Codes » Jumbo Universal Remote Codes & Program Instructions

Jumbo Universal Remote Codes & Program Instructions

If you want to get the universal jumbo remote control codes, you need to program the remote, then you can easily operate this remote with your TV. If you don’t know how to program your remote to work with your TV, you need to follow the methods mentioned below. Try the methods one by one, you will definitely find a working method, and then you can easily enter the codes to be connected to your TV and this universal remote control.

If you want to get the list of remote codes first, you can check them below, if not, you can skip the table and find the programming procedures below.

Jumbo Universal Remote Control Code List

Mark Remote code
ADMIRAL TV 001, 173
AIWA TV 195, 196
AKAI TV 002
AOC Television 009, 014, 132, 156, 175
APEX TV 214
AUDIOVOX TELEVISION 053
CITIZEN TV 009, 042, 053, 058, 105, 109, 177
CRAIG TV 042, 053
DAEWOO TV 018, 019, 042, 058, 082, 085, 097, 100, 126, 127, 130, 138
EMERSON TV 035, 036, 037, 038, 039, 040, 041, 042, 043, 045, 049, 051, 053
FUJITSU TV 051, 197
FUNAI TV 042, 051, 053, 155, 189, 198
GE TV 015, 022, 031, 044, 052, 054, 055, 087, 092, 103, 107, 125, 164
HITACHI TV 001, 004, 009, 013, 059, 060, 061, 088, 091, 137, 139, 140, 141, 142, 143, 144
HAIER TV 216, 217
JENSEN TV 004, 009
JVC TV 013, 054, 055, 060, 065, 067, 089
LG TV 044, 005, 009, 056, 057, 155, 156, 172
MAGNAVOX TV 004, 008, 009, 062, 068, 069, 074, 075, 077, 089
MEMOREX TV 000, 001, 004, 009, 049, 051, 135
MITSUBISHI TV 004, 005, 009, 022, 051, 081, 089, 132, 180
NEC TV 003, 004, 005, 009, 010, 085, 089, 095
PANASONIC TELEVISION 003, 051, 055, 062, 070, 148, 170, 171
PHILIPS TV 062, 068, 069, 074, 075, 077, 086, 087, 089, 163, 183
PIONEERING TV 004, 009, 090, 179, 185
PROSCAN TV 000, 015, 031, 107
QUAR TV 003, 054, 055, 062, 070, 148, 170, 171
RCA TV 007, 009, 011, 015, 048, 082, 092, 094, 096, 098, 101, 102, 103, 107, 113
SAMSUNG TV 004, 005, 009, 015, 104, 105, 106, 109, 172
TV SANSUI 135, 136
SANYO TV 004, 013, 049, 108, 110, 180, 209
TV 004, 009, 079, 095, 111, 112, 114, 122, 123, 124, 173
SONY TV 002, 006, 071, 128
SYLVANIE TV 004, 008, 009, 062, 068, 069, 074, 075, 077, 155, 161, 163, 189, 198
TOSHIBA TV 013, 049, 089, 105, 109, 117, 118, 120, 159, 178
ZENITH TV 000, 001, 004, 023, 038, 058, 059, 064, 073, 121, 135, 136

How to program the Jumbo universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Jumbo Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Giant universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Jumbo universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion:

In this blog post, we have mentioned each Universal remote control codes for Jumbo, but if you have problems with the above universal remote control codes or we failed to mention some codes, please leave a comment, we will rectify the faults and we will also mention those Jumbo remote control codes.

Leave a Comment