Home » Uncategorized » Jensen TV Universal Remote Codes & Program Instructions

Jensen TV Universal Remote Codes & Program Instructions

Looking forward to jensen universal remote control to operate jensen tv, we have various universal remotes such as ge universal remote control, directv..etc, we need to enter different jensen tv universal remote control codes into our favorite remote control to start to work with this jensen the telly. If you want to be programmed with your favorite remote and TV, follow the methods below using the codes we have mentioned below.

4-digit Jensen TV universal remote control

  • 0004
  • 0009
  • 0133

3-digit Jensen TV universal remote control

  • 004
  • 009

5-digit Jensen TV universal remote control

11326, 13204, 10761, 11299, 10050, 10817, 11933, 10815, 12541, 10005, 12210, 12726, 12284

Universal RCA Remote Control Codes for Jensen TV

  • 1004
  • 1006
  • 1196

GE & One-For-All Universal Remote Control Codes for Jensen TV

0004, 0009, 0133

Philips universal remote control codes for Jensen TV

0002, 0502, 0914

How to program the Jensen TV universal remote control?

The methods mentioned below will vary depending on which universal remote you are trying to use for your TV, so change the methods and also change the codes, whenever your remote and your TV seem not to sync with the codes. So let’s start programming now.

We have mentioned an alternative method to find your codes in your remote control such as ge universal remote control codes for jensen tv, jensen universal remote control codes jer 422, jensen directv tv codes… etc.

How to program the Jensen TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Jensen TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Jensen TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been used to program your jensen TV as well as your favorite remote control. These methods are used for setting up the jensen tv remote control.


If you found that any of the above codes didn’t work for your device, try entering the alternative codes mentioned above and you are still having the same issue, then leave a comment below about your problem and we will try to solve it and also provide a better solution for you.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment