If you are using the goldstar tv you need to use the universal gold star tv remote control codes below, these goldstar remote control codes can be programmed with your gold star tv and will work just fine. So why late, just check the codes one by one and be programmed with your TV and universal remote, then once try the methods mentioned below and connect the codes below as we mentioned in the methods.
Goldstar Tv Universal Remote Codes
Goldstar Tv Universal Remote Control Codes for RCA
GE & One-For-All Universal Remote Control Codes for Goldstar Tv
0004, 0009, 0005, 0227, 0338, 0012, 0057, 0080, 0156
Philips Universal Remote Control Codes for Goldstar Tv
0002, 0502, 0102, 0324, 0435, 0802, 0307, 0609, 0217
Magnavox Universal Remote Codes for Goldstar Tv
0017, 0028, 0067, 0073, 0076, 0085, 0086, 0087, 0088, 0089, 0090
How to program Goldstar Tv universal remote control with automatic search
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program Goldstar TV Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been used to program your Goldstar TV and also for your favorite remote control.
We have mentioned all the methods as well as all the universal remote control codes, you just need to enter the code according to the methods mentioned above and the device will be programmed with the remote control.
If you have any questions, please do not hesitate to ask us and we will resolve them as soon as possible.