Home » Blu-Ray » Funai TV Universal Remote Codes & Program Instructions

Funai TV Universal Remote Codes & Program Instructions

Have you brought a new universal remote for your Funai TV and don’t know the remote control codes, here is the best guide to program your TV with the universal remote using some codes like three digit codes, four digit codes and also five digit codes too.

Funai Blu-ray Codes

Universal remote control code for funai dvd player

List of 4-digit codes for the Funai TV universal remote control

  • 0053
  • 0189
  • 0051
  • 0042
  • 0456
  • 0227

List of 5-digit codes for the Funai TV universal remote control

  • 10180
  • 11963
  • 11271
  • 10171

Funai TV universal remote control 3-digit code list

  • 053
  • 189
  • 051
  • 198
  • 042
  • 155

Universal RCA Remote Control Codes for Funai TV

1038, 1046, 1047, 1189

GE & One-For-All Universal Remote Control Codes for Funai TV

0051, 0189, 0053, 0227, 0456, 0042

Philips universal remote control codes for Funai TV

0706, 0520, 0906, 0324, 0247, 0805

Universal Magnavox remote control codes for Funai TV

0043, 0044

GE Universal Remote Control Codes for Funai DVD Player

0051, 0189, 0053, 0227, 0456, 0042

How to program the Funai TV universal remote control with automatic search

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Funai TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Funai TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Funai TV and also your favorite remote control. These methods are used for the configuration of the Funai remote control.

Conclusion:

If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site. Or do you need other remote codes, please feel free to ask us through the comments section below and we will provide those codes to you.

Leave a Comment