Home » Set-up Box » DVD Universal Remote 3 Digit Codes

DVD Universal Remote 3 Digit Codes

With DVD universal remote control, we can operate our DVD and those remote controls capable of handling your DVD related audio and video devices of any brand. To operate any of your DVD devices, you need to enter specific numbers such as a 3-digit device code into your DVD universal remote. If you are unable to find your remote’s model number, you need to check inside the battery compartment or it may be on the back of the remote.

3-digit DVD universal remote control codes

Mark Coded
Advent 899
Afreey 417
Aïwa 376, 414
Akai 357, 395, 435
Ames 431
Mountain peak 386, 390, 391, 392, 401, 424, 430, 436, 439, 445, 457, 459
A trend 393
Audiovox 896
Axion 896
B&K 898
Blaupunkt 430
Bodysonic 417
Bose 672
Broksonic 394
Changhong 401
Cinevision 405
Classic 401, 431
Coby 317
Criterion 448
Curtis International 906
Cybermouse 393
Daewoo 440, 441, 444
Denon 362, 400, 421
Denzel 428
Digitrex 445
Disney 458
Double 428, 446, 447
DVD 2000 402
Elta 434, 435
Emerson 396, 405, 456, 458
Sinner 378, 416
funai 456, 458
To give 403, 409, 430
Star of gold 396, 405
Go video 407, 426, 431, 455
Great 415
Green hill 430
Haaz 451, 452
Harman Kardon 427
Hitachi 404, 407, 419, 428
Hiteker 445
Infinite 417
Badge 405, 456
Initial 430
To integrate 422, 442
Jbl 427
JVC 368, 406, 418, 901
Kenwood 400, 429
To kiss 428
Klh 430
Konka 372, 373, 374, 375, 410, 411, 412, 413
Koss 415
Lasonics 451, 454
Lenoxx 435
Lg 396, 405
Linn 443
Liteon 318
Magnavox 360, 370, 398, 408, 456, 900, 903, 904
Marantz 360, 396, 398, 405, 408, 423, 903
Memorex 446
Microsoft 403, 409
Mintek 430
Mitsubishi 364, 402
Mustek 431
More 396, 405, 433
Nakamichi 432
Nesa 430
Norcent 317, 318, 319, 905, 907
Onkyo 422, 892
Optimus 404
Orion 394
Oritron 377, 415
Panasonic 362, 363, 400
Peaceful 446
Philips 360, 362, 370, 387, 396, 398, 400, 408, 423, 437, 755, 891
Philips-magnavox 398, 408, 423, 900, 904
Pioneer 366, 403, 404, 893, 897
Polaroid 385
Polk Audio 398, 408, 903
Portland 435
Proline 415
Proscan 365, 403, 409
Radioshack 404, 443, 449, 453, 894, 895
Réoc 451
RCA 365, 403, 409, 430, 443, 449, 453, 895
Rotel 406
Seven 894
Samsung 369, 407, 454, 455
Sampo 417
Sansui 394
Sanyo 416
Sears 394
Segment 428
Sharp 359, 397
Sherwood 425
Shinco 430
Shinsonic 430
Sony 320, 321, 322, 361, 389, 399, 909
Sylvanie 456, 458
Symphonic 456, 458
Tea 404
Technical 400
Techwood 433
Tevion 388, 446, 447, 448, 449, 450, 451, 452
Digital theta 404
Toshiba 360, 394, 398, 436, 447, 890, 902, 908
United 449
Wharfedale 417, 442
White Westing House 458
X-box 409
Yamaha 362, 400, 420, 900, 904
Yamakawa 428, 438
Zenith 358, 367, 396, 405, 437

We have three methods for programming a DVD universal remote control with your devices using the specific DVD codes for the DVD universal remote control. So follow the steps below if you already have the universal three- or four-digit or five-digit DVD remote control codes with you, you can follow the procedure below. If not, see the table below.

How to program the universal DVD remote control?

There are three easy ways to install or configure a universal remote and the first is to use a key code, program via a universal remote code for DVD search and manual setup.

How to program the universal DVD remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program a DVD Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the universal DVD remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Leave a Comment