Home » Uncategorized » Durabrand TV Universal Remote Codes & Program Instructions

Durabrand TV Universal Remote Codes & Program Instructions

Do you need Durabrand TV universal remote control codes? to control your Durabrand TV! here you can get all kind of codes like three digit codes and also four and five also you can use any kind of brand universal remote and codes vary from brand remote to other remote brand.

Durabrand TV universal remote control 4-digit codes

  • 0178
  • 0180
  • 0493
  • 1038
  • 1046
  • 1034
  • 0003
  • 0623
  • 1047
  • 1109
  • 0154
  • 0236
  • 0003
  • 0171
  • 0463

Durabrand Surround Sound Remote Codes

  • 0449
  • 0405
  • 0776
  • 1089
  • 1090

Durabrand TV codes for Directv remote control

  • 10171
  • 10178

Universal RCA Remote Control Codes for Durabrand TV

1004, 1038

Universal GE and Universal Remote Control Codes for Durabrand TV

0189, 0135, 0157, 0153, 0254, 0458, 0217

Philips Universal Remote Control Codes for Durabrand TV

0520, 0115, 0317, 0916, 0027, 0447, 0323

How to program a universal remote control on a Durabrand TV

Using the codes below we can sync the remote with durabrand tv and the methods to program your tv remote have been mentioned below, check now.

How to program the Durabrand TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Durabrand TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Durabrand TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

If you try any of these methods, you can find a suitable method to program your branded universal remote, after which you can operate your favorite TV shows with your favorite remote.

Conclusion:

We hope you found this article helpful. If you can’t find the codes for your universal remote, leave a comment that includes your remote what type is it and what digital codes have you tried from those codes.

Leave a Comment