Home » Uncategorized » Devant TV’s Universal Remote Codes & Program Instructions

Devant TV’s Universal Remote Codes & Program Instructions

To use one of your favorite universal remotes for your front TV, you need to program with the universal remote codes. The codes are mentioned in the lines below and you can enter these codes into your device according to the steps mentioned below. So try these codes like two digit codes, three, four and five digit codes can work for all brands like cybertec rm-l1107 + 3, chunglap, huayu, keyin etc.

List of 3-digit codes for the Front TV universal remote control

  • 024
  • 023

List of 4-digit codes for the Front TV universal remote control

0102, 0134, 0193, 0195, 0196, 0214, 0231, 0338, 0349, 0355, 0384, 0416, 0456, 0457, 0460, 0472, 0476, 0477, 0509, 0526

Front TV universal remote control 5-digit code list

  • 00001
  • 00002

GE and Philips Universal Remote Control Codes for TV Front

  • 6211

Cybertec universal remote code for Front

Use below the method without code to program your TV front with the cybertec remote control

How to program the universal remote control in front of TV without code

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program in front of TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the Universal TV Front remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your Before tv and also for your favorite remote control.


If your device is still not programmed with the universal remote, please feel free to ask us your problem as a question and our experts will solve it as soon as possible, please visit our blog, continue to visit our official website to get updates whenever we post new articles.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment