Can’t wait to get craig tv universal remote control codes then here is the end of your search, from this blog post we are going to mention all universal remote control codes for craig sound bar so why later , just check the list below and there you will get all types of codes like 2 digit, three digit and also four digit and five digit codes.
Contents
- 0.1 Craig TV Universal Remote Control 4-Digit Code List
- 0.2 Craig TV Universal Remote 3-Digit Code List
- 0.3 Craig TV Universal Remote Control 5-Digit Code List
- 0.4 Craig Soundbar Universal Remote Control Code
- 1 How to program Craig TV universal remote control without codes
- 2 How to program Craig TV Universal remote control with manual method
- 3 How to program the Craig TV universal remote with Code search
Craig TV Universal Remote Control 4-Digit Code List
00073, 6222, 06222, 10180, 0073, 10073, 16222, 11822
Craig TV Universal Remote 3-Digit Code List
541, 536, 691, 662, 666, 667, 682, 009, 657, 669, 694, 532, 542, 533, 963, 038, 042, 053, 037, 161, 180, 282, 171, 064, 038, 064, 009
Craig TV Universal Remote Control 5-Digit Code List
10180, 13423, 10161, 19411, 11922
Craig Soundbar Universal Remote Control Code
00161
Universal RCA Remote Control Codes for Craig TV
- 1038
GE and One-For-All Universal Remote Codes for Craig TV
- 0053
- 0042
Philips Universal Remote Control Codes for Craig TV
- 0906
- 0805
Magnavox Universal Remote Codes for Craig TV
- 0044
- 0052
How to program Craig TV universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Craig TV Universal Remote”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Craig TV universal remote with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been worked out to program your Craig TV and also your favorite remote control.
Conclusion:
First, you need to confirm the brand name of your remote, then try all the universal remote control codes mentioned in the above list one by one, you can also use the methods to program your remote, so why start late with any code until you are paired with your craig TV.
If you have any questions, please feel free to ask us and get an instant response as well.