The remote control codes for Comcast audio components are usually in the form of 5 digits and these universal remote control codes have been assigned as the codes that should work for all home theaters and sound bars. We have so many codes for this Comcast and you can program it with these codes using the easy methods. You can now program the Comcast remote with different methods such as automatic search, manual method. So try them out from the instructions below and connect your remote to your device.
- 1 Comcast Universal Remote Codes for Sound bar, audio and Home theater
- 2 How to program the Comcast Cable soundbar universal remote control without codes
- 3 How to program the Comcast Cable sound bar Universal remote control with manual method
- 4 How to program the Comcast Cable soundbar universal remote control Code search
Comcast Universal Remote Codes for Sound bar, audio and Home theater
These codes below can also work for soundbar, audio, and home theater, so just pick your brand, pick the code, and enter your remote.
|Aïwa||30158, 30189, 30405|
|Harman / Kardon||30110, 30189|
|Kenwood||31313, 31570, 30027, 31027|
|Pioneer||31023, 30014, 30531, 31384|
|RCA||31023, 31254, 30531|
|Sanyo||31261, 31469, 31801|
|Sony||31759, 30158, 31758|
|Neighborhoods||30158, 30189, 30014|
To verify: comcast universal remote control codes
How to program the Comcast Cable soundbar universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program the Comcast Cable sound bar Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been used to program your Comcast Cable sound bar and also your favorite remote control. These methods are used for configuring the Comcast Cable Soundbar remote control.
If you need help with universal remote control codes, leave your request and we will resolve your issue ASAP.