COBY TV’s Universal Remote Codes & Program Instructions

Have you ever used the universal remote control if you haven’t bought it now, because it is the most useful equipment to operate any type of TV, in this specific session we give the universal remote control codes for COBY TV, codes include three digits, four digit work universal remote control codes coby.

Coby Tv 5 Digit Universal Remote Control Codes

  • 01376
  • 11538
  • 12017
  • 10178
  • 12003
  • 11531
  • 11265
  • 11314

Coby Tv 4 Digit Universal Remote Control Codes

  • 1538
  • 2017

COBY TV universal 3-digit remote control codes

505, 626, 627, 594, 633, 593, 720, 607, 604, 699, 005, 205, 625, 266, 165, 267, 256, 056, 257, 262

How to program the COBY universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program COBY Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the COBY universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Conclusion:

You can use the above codes for Coby 5 in 1 universal remote control codes, for coby 8 in 1 universal remote control for manual setup as well. We hope this article has helped you a lot, if you have encountered any interruptions while following the above methods let us know through the comments section below.

Rate this post

Leave a Comment