Have you brought a new universal remote for your Axess TV and don’t know the remote control codes, here is the best guide to program your TV with the universal remote using some codes like three digit codes, four digit codes and also five digit codes too.
- 0.1 List of 4-digit codes for the Axess TV universal remote control
- 0.2 List of 3-digit codes for the Axess TV universal remote control
- 1 How to program the Axess TV universal remote control?
- 2 How to program the Axess TV universal remote control without codes
- 3 How to program Axess TV Universal remote control with manual method
- 4 How to program the Axess TV universal remote control with Code search
List of 4-digit codes for the Axess TV universal remote control
List of 3-digit codes for the Axess TV universal remote control
How to program the Axess TV universal remote control?
In fact, the procedure for finding the code of your Axess TV remote control varies from one brand to another. Here we are providing the procedure to find the codes for your axess TV, then try this method once, if it doesn’t work for your TV, try the alternative methods below.
- Just press the “TV button” then “Exit”
- Now continue to press and hold the button and after a few seconds the “The red LED flashes twice”, so you can free now.
- Now “enter the three-digit code (9-9-1) ” (On your remote you can see two flashes)
- Then slowly press the “Powerful television” and also “Television apparatus” buttons until the device is “Switch off”
- You must make sure when searching “The remote control must be pointed at your device”
- Now you may need to press this button sequence multiple times to find the set “Code library”
- Whenever your TV is turned off, you must “Hurry” the “Configuration button” then release it to lock your TV code.
If you find it unnecessary to program, use the methods below, they might help.
How to program the Axess TV universal remote control without codes
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
- You must first “Turn on the device”
- press the “TV” On your “Axess TV universal remote control”
- Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
- Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
- Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
- You can release the “Power button” every time the screen turns off
That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.
How to program the Axess TV universal remote control with Code search
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel upwards until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope the above methods and codes have been worked out to program your Axess TV as well as your favorite remote control. These methods are used for the configuration of the Axess remote control.
If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site. Or do you need other remote codes, please feel free to ask us through the comments section below and we will provide those codes to you.