Are you trying to program the Axess soundbar remote control but having a little difficulty? This article will answer everything you need for a successful installation process. All you need are the instructions and universal remote control codes for the Axess sound bar player which we are going to discuss. Read this article and get wonderful results for your ultimate home entertainment system experience! We have mentioned some easy methods on how to enter the codes into your remote and set them up with your soundbar, so check the methods below with the codes.
- 1 Axess Soundbar universal remote control code list
- 2 How to program the Axess Soundbar universal remote control
- 3 How to program Axess Soundbar universal remote control with automatic search
- 4 How to program the Axess soundbar Universal remote control with manual method
- 5 How to program the Axess Soundbar universal remote control with Code search
Axess Soundbar universal remote control code list
The key to programming your favorite remote control and making it work with other devices is using the Axess soundbar’s unique universal remote control codes. All the codes you could possibly need are all here. Just write down the make and model of the device you want to program with the Axess soundbar remote control and find them here. Here is the list of Axess soundbar universal remote control codes you need:
How to program the Axess Soundbar universal remote control
Sit back and relax as we provide you with the easy-to-follow steps to program the Axess Soundbar Universal Remote Control. You may not need expert technician help to set up your device.
Follow the steps below to successfully program your device:
How to program Axess Soundbar universal remote control with automatic search
In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:
- “Light up” smart device like “TV” that you want the universal remote to work.
- “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
- Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
- Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
- Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.
How to program the Axess soundbar Universal remote control with manual method
Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.
If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode
- First of all “Turn on the device”
- Now press and hold the “To install” button
- Enter the “9-9-1” code (three digits)
- Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”
The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.
We hope this article has helped you set up your device. Tell us more about how this article has helped you. Your comments are very important in improving our site.