Home » Uncategorized » AOC TVs Universal Remote Codes & Program Instructions

AOC TVs Universal Remote Codes & Program Instructions

Have you ever wanted to use the AOC universal remote control or want to know the codes of your favorite remote control to program with your AOC TV, here are the latest codes that are required to program your TV with one of your favorite remote controls.

AOC TV Codes 4-digit universal remote control

6060, 0030, 0093, 0108, 0178, 0179, 0180, 0451, 0019, 0003, 0052, 0185, 0628, 0009, 0018, 0060, 0092, 0004, 0005, 0014, 0156, 0175, 0187

Universal remote control AOC TVs Codes 3 digits

271, 506, 503, 052, 180, 004, 573, 503, 009, 345, 006, 011, 913, 007, 217, 520, 005, 088, 187, 505, 030, 102, 185, 014, 077, 002, 54, 119, 003, 235, 712, 695, 566, 131

Universal remote control AOC TV Codes 5 digits

12210, 18905, 10052, 12621, 13707, 10030, 00019, 12268, 12501, 12287, 16105, 12014, 19959, 11365, 10106, 10005, 11089, 12501, 12268, 12574

GE Universal Remote Codes for AOC TV

0004, 0005, 0009, 0014, 0156, 0175, 0187

Universal RCA Remote Control Codes for AOC TV

1004, 1005, 1006, 1007, 1082, 1195, 1196

Philips universal remote control codes for AOC TV

0002, 0102, 0502, 0003, 0217, 0119, 0320

Magnavox Universal Remote Codes for AOC TV

0017, 0023

How to program the AOC TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:

  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-“ switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program AOC TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

How to program the AOC TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

We hope the above methods and codes have been worked out to program your AOC TV and also for your favorite remote control. These methods are used for the configuration of the AOC remote control.

Conclusion:

If you feel good with this item then please give us a feedback, it will give us a boost to improve our site and to reach many aspiring those who are waiting for their codes remotely, we also accept new ones universal remote control codes those that work for you, please leave these codes in the comments section below, we will pass them on to other users as well by posting them on our site.

Leave a Comment