Home » Uncategorized » Akira TV Universal Remote Codes & Program Instructions

Akira TV Universal Remote Codes & Program Instructions

Akira TV has different kinds of brand universal remotes and if you are using any of these remotes or if you are using akira tv and want to configure with universal remote you need to have the codes as the codes can be two digit codes , three-digit codes or four-digit codes, you can get them in the table below and set up your akira tv remote with your favorite brand universal remote.

In this blog post, we have mentioned all the universal remote control codes for akira tv and three methods are also provided in the lines below if you don’t know how to set up a brand universal remote control with your TV then follow them and try different codes until your TV remote is programmed with the universal remote.

Akira TV Universal Remote Codes 2022

Universal 4-digit Akira TV remote control codes

  • 2457
  • 0753
  • 4226
  • 0037
  • 3480
  • 3494
  • 2241
  • 2530
  • 2333
  • 4155
  • 1878
  • 0418
  • 0445

Akira TV Universal 3-digit remote control

  • 211
  • 611
  • 350
  • 381
  • 384

Akira TV Universal codes for One For All remote control

2457, 42433, 3494, 0037, 35151, 25556, 0418, 1878, 11212, 0753, 2530, 3480, 4226, 26525, 2333, 2241

Akira TV Universal codes for Philips remote control

  • 0445
  • 0079

Akira DVD Universal Remote Control Codes

073, 099, 086, 088, 089, 090, 091, 093, 095, 097, 098, 051, 069, 070, 112, 033, 058, 006, 007, 009, 074, 102, 136, 000, 020, 054, 027, 028, 117, 123, 124, 125, 126, 042, 144, 149, 127, 158, 128, 129, 147, 140, 145, 138, 135, 137, 150, 133, 045, 055, 056, 008, 014, 017, 019, 023,025, 031, 035, 040, 041, 063, 060, 075, 081, 087, 065, 011, 015, 021, 029, 030, 032, 034, 038, 044, 047, 048, 049, 057, 064, 067, 068, 132, 072, 046, 094, 001, 002, 092, 061, 083, 096, 156, 101, 103, 104, 105, 106, 107, 108, 111, 114 and 116.

How to program the Akira TV universal remote control?

There are three easy ways to set up or set up a universal remote and the first is by using a key code, programming via a universal remote code for Akira Tv search and manual setup.

How to program the Akira TV universal remote control without codes

In the automatic search method, all universal remote control codes have gone through a scanning process in the remote control. It scans one code at a time to find the correct remote code that works with your remote to program the command. Follow the instructions below:


  1. “Light up” smart device like “TV” that you want the universal remote to work.
  2. “Light up” remote control, press the button on the device (TV, DVD, CBL and OK / SEL) for 3 seconds. The LED indicator indicates that the device is ready to be programmed.
  3. Point the remote control at the device and click “CH +” & “CH-” switches. The remote will display the on / off signals. hurry “up” Where “down” continuously until the device switch off.
  4. Check the code by clicking on “Power” key. The device must light up. If it starts, try changing the channel to verify that the remote is correctly programmed.
  5. Now press the “device” button to save the code. The device LED will blink twice to confirm the stored code.

How to program Akira TV Universal remote control with manual method

Using the key code we can easily program a universal remote control and the key code identifies the make and model of your equipment.

  • You must first “Turn on the device”
  • press the “TV” On your “Akira TV universal remote control”
  • Now press and hold the “Configuration button” on the universal remote until it displays the “Bright flash” (This means it is in “learning mode”)
  • Finally enter the “Key code” that you have found in the programming guide (Instruction booklet)
  • Once you have done this procedure, all you need to do is “Point your remote control at the television” then “Press and hold the power” button
  • You can release the “Power button” every time the screen turns off

That’s it, your TV will work fine now with the universal remote control, if your device does not work then try repeating the same procedure with the different code from the same part of the reference table.

How to program the Akira TV universal remote control with Code search

If you can’t find the key code that works for the device at that time, you can configure your universal remote to search for the correct one. It’s a code in the manual that forces the remote into search mode

  • First of all “Turn on the device”
  • Now press and hold the “To install” button
  • Enter the “9-9-1” code (three digits)
  • Now hold the “Power button” on the remote control, then press the channel up until the device in this case your TV “Off”

The above method may take a little longer, but finding your key code is very important. Once you have completed the above procedure, your remote control should work for all in functions.

Photo of author

Suresh Choudhary

Suresh is a former writer for Lifewire who started reporting on consumer electronics in 2015. He's focused more closely on home entertainment and home theater technology like Ultra HD, Blu-ray, and DVD players. Since studying electronics in high school, he's been a fervent electronics and audiophile hobbyist.

Leave a Comment